Attach this accessory to your rotary polisher or drill to convert to a very handy, free-form polishing attachment that accepts tiny 25mm (1 inch) pads and allows you to put the detail into detailing.

Comes with all pads pictured

1. 25mm Glass pad (White)

2. 25mm Wool heavy cutting pad (White)

3. 25mm Foam heavy cutting pad (Green)

4. 25mm Foam light polishing pad (blue)

TO USE WITH CONVENTIONAL DRILL
1. Attach the spindle to your drill chuck and tighten the chuck

2. Insert pad backing plate and attach pad, tighten chuck hard by hand, or lightly with a spanner.

3. Check that your drill chuck won't catch on anything and that you are ready to polish.  Apply a pea sized drop of polish (CAP Heavy recommended) to pad. 

4. Set the drill to a low speed and lock trigger, polish until you're happy with the results, enjoy :)

TO USE WITH ROTARY POLISHER
1. Attach the included adaptor to the spindle and tighten hard by hand, or lightly with a spanner, then, screw the adaptor onto any M14 threaded rotary polisher (such as Brutus).

2. Insert pad backing plate and attach pad, tighten chuck hard by hand, or lightly with a spanner.

3. Secure your rotary and check that your machine won't catch on anything and that you are ready to polish.  Apply a pea sized drop of polish (CAP Heavy recommended) to pad.

4. Set the polisher to a low speed (speed 1-2 on Brutus) and lock trigger.  Polish until you're happy with the results, enjoy :)