Full Metal Jacket Spray Wax is a super-hydrophobic, oleophobic, nano-polymer spray sealant that blocks 99% of UV rays from penetrating the coating.

Full Metal Jacket adheres to and protects almost all exterior surfaces of most vehicles including;

- Gloss & matte paintwork
- Gloss & matte vinyl wrap or polyurethane stone chip protection films
- Chrome & anodised trim
- Glass
- Polycarbonate (headlights) and acrylic (tail lights)

Full Metal Jacket Spray Wax may be used as a stand alone sealant and your only form of paint protection or as a maintenance spray for your Full Metal Jacket Paint Protection layer, it is best applied regularly above a Full Metal Jacket Paint Protection base layer for maximum protection.

Directions of Use
There are two methods for application of Full Metal Jacket Spray Wax. The first yields a thicker layer, the second is faster, easier and requires less product and material. Final Inspection recommend to apply the first layer with the first method and the second and subsequent layers with the second method as maintenance of your sacrificial protection layer. If you are maintaining a Full Metal Jacket Paint Protection coating, we recommend only the second method as maintenance.

Method 1

1. Shake bottle well.

2. Spray 3-6 pumps of Full Metal Jacket onto a NanoFibre Paintwork Applicator and apply to clean, dry surfaces.  Allow 1 minute to bond, then begin to remove with a NanoFibre Paintwork Cloth, turning cloth regularly until a high gloss is achieved.

3. All surfaces should feel significantly slicker and appear glossier after application.

Method 2

1. Shake bottle well.

2. Spray Full Metal Jacket directly onto clean, dry paint, glass or chrome and immediately begin to spread and remove with a NanoFibre Paintwork Cloth, turning cloth regularly until a high gloss is achieved.

3. All surfaces should feel significantly slicker and appear glossier after application.

Allow 24 hours between coats.

Full Metal Jacket Spray Wax does not require a high skill level and whilst correct application of any sealant is important, applying Full Metal Jacket Spray Wax correctly is very easy to achieve.

One layer of Full Metal Jacket will typically last 2-3 months, multiple layers (3 or more) applied 1 week apart will yield up to 1 year of protection.

Full Metal Jacket Spray Wax will not adjust sheen on matt or satin surfaces when used correctly.

Full Metal Jacket exhibits excellent coverage. Only a tiny amount of Full Metal Jacket is required to consistently cover even large vehicles. Typically, only 25ml of Full Metal Jacket will be required to cover a standard sized vehicle.

Specifications

Polymer concentration: 55%

Bonding time: 60sec @ 25°C (77°F) to 2min @ 10°C (50°F)*

Curing time: 24 hours (layerable after 12 hours)**

Protection per coat: ~2-3 months

Packaging: Final Inspection 275ml / 9.3 fl oz  pump pack w/ trigger

Refill and professional sizes: 500ml l 5 Litre l 20 Litre

Version information: v2.5 l optimised 2021

Design and manufacture: designed and manufactured in Australia from Japanese materials

* bonding times vary with humidity and extreme temperatures, FMJ products should not be applied at
extreme temperatures, i.e. at or below 5°C (41°F) or at or above 40°C (104°F)
** curing times vary depending on temperatures, 24 hours minimum curing required before washing
and up to 1 week in extreme temperatures.